Automatic Transfer Switch (ATS) 5-22 KVA Single Phase

Automatic Transfer Switch (ATS) 5-22 KVA Single Phase

$1,095.00 inc GST
(No reviews yet) Write a Review
Weight:
15.00 KGS
X
SKU:
GT20628-1
Share:

Secure Payments

 

This Automatic Transfer Switch suits generators with an output up to 60amps. 

This modern ATS (automatic-transfer-switch) conveniently and automatically minimizes power interruption, without expensive equipment and the high costs normally associated with installing this type of equipment. It monitors incoming/grid power for faults and the instant interruption occurs, the control signals the standby generator to start. When good incoming grid power returns the switch is designed to wait for power to stabilize before switching back to standby mode. A compact Automatic Transfer Switch which offers safety circuit breaker protection, timed switching sequences ensuring power is smooth and concise during automatic switch transfer/s.

Installing this ATS automatic transfer switch and used in conjunction with a suitable (automatic start capable) generator will ensure a reliable and fast acting backup power supply is available for your essential services the instant an outage occurs!

There are many advantages with having a ATS which include:

- Reduced interruption or downtime to I.T, in commercial, domestic or agricultural areas.
- Domestic and commercial refrigeration, medical backup, lighting and security applications.
- Basement or ground water pumping applications. Pharmaceutical, food treatment areas and environmental organic plant processing.
- Medical suites including doctors, dentists, health care professional practices and clinics.
- Supermarket front end, cash registers, UPS and communication backup.


The ATS (automatic transfer switch) conveniently and automatically minimises power interruption. As the ATS constantly monitors grid power, the instant power is interrupted it signals the standby generator to start. When power is available, of the correct voltage and frequency and only then will the switchover to the essential circuits be completed. Power is restored to your essential circuits smoothly and efficiently. When the grid or mains power returns, the ATS is designed to delay the handover, back to mains to eliminate possible instabilities of the local grid/mains power. An adjustable two minute delay is designed to ensure a stable continuous mains/grid power source is available. After the handover delay period, the ATS seamlessly reconnects the essential circuits. The control then signals the standby generator to shut down, ready in standby mode.

Installation Process: . It can be installed as an emergency power supply for the essential services part of an installation or the whole of the installation. Certainly, having those important appliances covered can make life a little easier, convenient, knowing you are adequately protected in the event of power failure. “Did you know most damage to electrical appliances occurs at the point when mains power is restored while the electrical appliance is plugged in and switched on? This is due to voltage or current spikes and transients caused by excessive grid loading when the mains power is restored. This cannot happen with the ATS due to its operating design.” Shops, offices, supermarkets, medical centres, houses & garages can be equipped without spending large sums on maintaining complicated standby powered installations.

​The Automatic Transfer Switch is an electrically controlled/switching device therefore proper installation MUST be carried out by a registered electrical contractor or person/s holding relevant qualifications. All installation practices must follow relevant Australian & New Zealand Safety standards. It is the responsibility of the installer to provide a safe operating environment for this device to work safely and efficiently.

Key Features:

  • Quality robust materials
  • Large space for easy connection of the power cables and engine
  • Control phase voltmeter Mains /Generator
  • EJP
  • Automatic choke management to ensure cold start of petrol engines in any weather
  • Easy, functional and efficient battery charger
  • Programmable automatic test
  • Display to visualise all electrical measurements and alarms
  • LED display for operating status
  • Overload protection
  • RS232 to allow for shortcut setup

There are no reviews for this product yet. Please write a review here.